Mounts

Narrow By

Narrow By

Color

  • Black (177)

  • Black-Silver (1)

  • Silver (63)

  • Silver and Black (1)

  • White (17)

Certification

  • CE Approved (3)

  • FCC Approved (6)

  • OSHPD Approved (6)

  • TAA Compliant (53)

  • TÜV Certified (20)

  • UL Listed (86)

  • WEEE Approved (3)

196 Result(s)

  • 20 Per Page
    • 5 Per Page
    • 10 Per Page
    • 20 Per Page
    • 50 Per Page
    • 100 Per Page
LVS1U_large
Quick View
ConnexSys™ Video Wall Mounting System
LVS Video Wall System Series
CHIEF_gray

Compare

Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements.


Read the complete story of ConnexSys here.


SPEED
  • Hang units on a single strut channel for quick row leveling
    • No need for horizontal spacers
    • Vertical measurement is simply the height of the display to the next rail
    • Compatible with most 1-5/8" sizes of channel strut
  • Reduces installation time - especially for XL and recessed configurations
  • Tool-free ClickConnect™ latching secures displays
  • PowerZone™ provides 6 points of adjustment in one easy-to-access location at the top of the mount

ALIGNMENT
  • PowerZone™ Adjustments
    • Height adjustment ±1" on each interface
    • Tilt adjustment at single pivot point, protects displays from twisting
    • Depth can be set between 4" and 7.4" from the wall, providing a range of "home positions" ideal for recessed installations
      • Both sides adjust independently, compensating for imperfections in the wall
      • Walls can be out of alignment by up to 2" (horizontally)
    • 3 levels of lateral adjustment
      1. Mount left/right along rail
      2. Interface left/right along mount
      3. Lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions

SERVICEABILITY
  • RapidDraw™ Display Release
    • Cord release system gently and remotely pops any screen out for easy access and can be extended 13.4" for service
    • Protects displays by not requiring an aggressive push to release/pop-out
    • Releases only on demand, preventing accidental pop-outs
    • The 10' (304.8 cm) cord can be set up to pull for release from any 90 degree angle
  • Kickstand provides 20 degrees of bottom tilt access

RIGIDITY
  • Rigid frame keeps displays where you set them, even after extending for service
  • Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes

MISCELLANEOUS
  • Security - pad lock ¼" shank diameter
  • Safety tested
  • Universal interface
  • Each mount comes out of the box with adjustments set in the exact same position
LTM1U_Large
Quick View
Fusion Wall Tilt
Fusion Wall-Tilt Series
CHIEF_gray

Compare

Chief's Fusion tilt wall mounts were developed based on installer feedback and direct observations of installers in the field. Favorite Fusion features include Centerless shift, Centris tilt, ControlZone leveling adjustment and ClickConnect Latching.  

Benefits included increased stability, fast installation, easy cable management and security. 

The installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.

    • Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall
    • Centerless Shift provides up to 17.5" (445 mm) of post-installation lateral shift - 8.75" (222 mm) left/right of uprights - for limitless centering
    • Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile
    • Set screws keep the mount rigid, stable and secure throughout the life of the installation
    • ClickConnect offers an audible click when the screen safely engages with the mount
    • Built-in cable stand provides easy access under the screen
    • A full line of accessories can be installed with the mount and the entire unit can be adjusted together
    • Multiple installation options for various stud distances
    • Exclusive nesting spacers can be stacked to achieve any depth
    • Quick-Store Cords use magnets to easily store and access pull cords
    • Improved cable management with new end caps
    • Integrated Security
    • Ships with a custom hardware kit that can be hung from mount rails if installing in stages
    • Easy Open box with less waste to throw away
RPMA_large
Quick View

Focusing on speed of installation, these elite ceiling projector mounts are packed with easy-to-use features that save time and maximize projector security.

Custom mounts can be found by using MountFinder for the specific product or by search for the custom SKU. 

  • Microzone Adjustments make projector registration fast and precise (including flush mount installations)
  • Centris Technology enables effortless fingertip positioning and self-adjusts to support different projector weights
  • Quick connect/disconnect for convenient lamp and filter access on most projectors
  • Maintains registration when disconnected and doesn't affect preset adjustments
  • Cable management without additional accessories
  • Q-Lock Quick Release Lever provides quick connect/disconnect of the projector for service and enhanced security with an integrated key and lock system
  • Same great features as the RPA Series, including independent roll, pitch and yaw, integrated cable management, and All-Points Security
  • Speed-Connect line of accessories further reduce installation time.
  • Available in three locking options: RPMA, RPMB, RPMC
  • Available with universal interfaces: RPMAU, RPMBU, RPMCU
  • Available with custom interfaces: RPMAXXX, RPMBXXX, RPMCXXX
  • Available without interface (mount only): RPMA000, RPMB000, RPMC000
LCM3X1U_large
Quick View

Chief's FUSION ceiling mounted solutions make it possible to construct menu boards in prominent locations where walls aren't available. Comes in 2 x 1 & 3 x 1 arrangements with options for landscape and portrait orientation. Combine to easily create longer menu boards.  Great for digital signage installations.

  • Screen array configuration: screens wide x screens high.
  • Confirm screen compatibility with MountFinder™

  • Single horizontal extrusion keeps screens aligned
  • Tilting interfaces with Centris technology makes for easy adjustment for +5 / -20 degrees
  • Tool-free screen engagement
  • Security: Add a pad lock to secure screen to mount
  • Fits screens 40 - 55" diagonals, add FCAX extension brackets for larger screens up to 65"
Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
LSM1U_Large
Quick View
Fusion Wall-Fixed Series
Fusion Wall-Fixed Series
CHIEF_gray

Compare

Chief's Fusion fixed wall mounts were based on installer feedback and direct observations of installers in the field. Favorite Fusion features include Centerless shift, ControlZone leveling adjustment and ClickConnect Latching.

Fusion mounts also feature stability, fast installation, easy cable management and security.

Installer-inspired Fusion fixed mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.

  • Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall
  • Centerless Shift provides post-installation lateral shift for limitless centering
  • Set screws keep the mount rigid, stable and secure throughout the life of the installation
  • ClickConnect offers an audible click when the screen safely engages with the mount
  • Built-in cable stand provides easy access under the screen
  • A full line of accessories can be installed with the mount and the entire unit can be adjusted together
  • Multiple installation options for various stud distances
  • Exclusive nesting spacers can be stacked to achieve any depth
  • Quick-Store Cords use magnets to easily store and access pull cords
  • Improved cable management with new end caps
  • Integrated Security
  • Ships with a custom hardware kit that can be hung from mount rails if installing in stages
  • Easy Open box with less waste to throw away
RPA0000
Quick View

The top-selling ceiling projector mount in the industry! This ceiling projector mount is installed in more offices, schools and homes than any other mount.

Custom mounts can be found by using MountFinder for the specific product or by search for the custom SKU. 

  • Independent roll, pitch and yaw for quick and precise projector registration
  • Quick connect/disconnect for convenient lamp and filter access on most projectors
  • Maintains registration when disconnected and doesn't affect preset adjustments
  • All-Points Security exclusive steel-into-steel locking hardware at all key connection points to protect against theft
  • Multiple installation options: flush mount to ceiling, mount with 0.25" threaded rods, or mount with 1.5" NPT threaded extension column
  • Cable management without additional accessories
LWM3X1U_large
Quick View
Fusion™ Large Wall Mounted Menu Board Solutions
LWM Menu Boards Series
CHIEF_gray

Compare

Fusion® Menu Board Wall Mounts offer perfect display positioning and flexible adjustments. The single horizontal extrusion with depth adjustment aligns the screens quickly even on irregular mounting surfaces and allows easy access behind the displays for servicing.

  • Single horizontal extrusion keeps screens aligned
  • ControlZone™ micro-height adjustment
  • Centris® tilt between +0 and -20 degrees
  • Tool-free screen engagement
  • Portrait and landscape options for 2x1 and 3x1 configurations
  • Landscape for 4x1 and 5x1 configurations
  • Accommodate 40-55” screens
  • Optional padlock security
  • Full line of accessories that work across Fusion wall, ceiling and freestanding lines
LPAUS_large
Quick View

This mobile Fusion AV cart incorporates rounded edges and sleek features to give the cart a softer professional feel that fits well in corporate and classroom environments. The height can be adjusted by one person via hand or 1/2" hex bit on a power drill.

Note: shelf and CPU holder accessories sold separately.

  • Sleek look suitable for multiple environments
  • Turn knob allows single user to easily adjust the screen height by hand or 1/2" hex drill bit to any height between 50 and 70 inches (127 - 177 cm)
  • Flexible cable covers allow lay in access anywhere along column
  • Centris Technology provides tilt and roll with use of knobs
  • Landscape screen orientation (portrait only if screen is at least 34" tall and has a mounting pattern 400 x 400mm or smaller)
  • Ships with preassembled heavy-duty casters (front two casters are lockable)

Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
K1C220S_large
Quick View

The enhanced Kontour™ K1C Dynamic Height-Adjustable Column Mounts are the perfect solutions for the office, healthcare facilities or home. K1C mounts provide the maximum amount of both dynamic and manual height adjustment for the ultimate ergonomic solution. And best-in-class weight capacity range makes specification simple!

Key enhancements have been made to Chief's patented Centris™ Extreme Tilt technology for effortless fingertip monitor positioning. Kontour™ monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment.


  • Best-in-class weight capacity range of 5 to 25 lbs. makes specification simple
    • No need to pay more for that "heavy duty" arm to support your Apple monitor or All-in-One!
  • Sleek, solidly-constructed forged aluminum arms in subtle silver & black finishes
  • Enhanced patented Centris Extreme Tilt provides +75°, -10° of effortless tilt, for optimal viewing comfort whether sitting or standing
  • Enhanced column interface enables easy upgrades from single- to dual- or triple-monitor installations without impacting the existing installation, future-proofing your investment
  • 20" (508 mm) of total height adjustment range
    • 13" (330 mm) of dynamic height adjustment using smooth motion gas-spring technology
    • Additional 7" (178 mm) of manual height adjustment on the column
  • Enhanced 3-step installation and quick-release monitor interface for easy mounting and maintenance, with included tool storage in the updated base
  • Easily clamps to edge of desk, through standard grommet hole, or through bolt hole with included kit
  • Tool-free cable management covers for a clean, professional look
  • With high levels of recycled content & a highly-recyclable design, Chief Kontour monitor arms may contribute to valuable LEED-CI, -NC, and -EB credits!
  • Most Kontour™ K1 products are TAA-compliant - see respective product pages for details

Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
LVM2X2U_2_large
Quick View

Chief's FUSION cart freestanding solution makes it possible to construct video walls in prominent locations.  Comes in landscape or portrait arrangements to fit any application.  

The LVM cart offers great mobility and flexibility while the LBM bolt-down version creates a permanent solution.

Screen array configuration: screens wide x screens high.

 

  • LVM cart allows video wall to be moved into any application
  • LBM bolt-down video wall will create a permanent solution when a wall isn't available
  • Easily align displays with independent height, plumb and lateral shift adjustment
  • Integrated cable management for a clean installation
  • Available leveling feet (FCA776) for more permanent installations for LVM (cart)
k4_large
Quick View

Ultimate flexibility meets form and function with the Kontour K4 series of elegantly designed, Focal Depth Adjustable monitor array grommet desk mounts from Chief.

Provides an aesthetic & easily adjustable solution for monitor array workstations where multiple users will want to re-position the bank of screens to their preferred viewing distance; such as control rooms, trading desks, call centers, security desks, IT, healthcare and more.

  • Articulating Focal Depth Adjustment for optimal ergonomics
  • Integrated handle for quick ergonomic adjustment to fit the user
  • Great for multi-user settings where fast & easy adjustment is critical!
  • Supports monitors up to 24" in both landscape & portrait
  • Swivel and Pan adjustment capability
  • Centris™ Fingertip Tilt for every monitor
  • Grommet or 1/2" Thru-Hole mounting
  • Simple installation
  • Integrated cable management
  • Streamlined, modern aesthetic
  • Huge variety of configurations available to accommodate workstations small and big alike
  • Kontour™ K4 products are all TAA-compliant

Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
LCM2X2U_large
Quick View

Chief's FUSION ceiling mounted solutions make it possible to construct video walls in prominent locations where walls aren't available. Comes in 2 x 2, 3 x 2 and 3 x 3 arrangements. Great for digital signage installations.

  • Screen array configuration: screens wide x screens high.
  • Confirm screen compatibility with MountFinder™.

  • PRECISE SCREEN ALIGNMENT
    • Easily align displays with independent knobs for height and plumb adjustments, no tools required.
  • CONTROLZONE™ LEVELING
    • Micro-height and leveling adjustment at all column intersection points.
  • INFINITE SCREEN POSITIONING
    • Infinite vertical and lateral adjustments provide tight display rows and columns.
  • HEAVY-DUTY CONSTRUCTION
    • Solid construction supports displays up to 55".
  • CONFIGURABLE
    • Add configurations side by side to create any video wall arrangements up to 3 screens tall
  • CEILING PLATE and EXTENSION COLUMN are required and must be ordered separately
XPAU_large
Quick View

This mobile Fusion AV cart incorporates rounded edges and sleek features to give the cart a softer professional feel that fits well in corporate and classroom environments. The height can be adjusted by one person via a 1/2" hex bit on a power drill without removing the screen.

Perfect for XL and touch panel displays as well as dual monitor video conferencing using the FCA623 accessory.

Pending Obsolete see XPA1U for replacement.

    • Sleek look suitable for multiple environments including education, corporate and digital signage
    • Turn knob allows single user to easily adjust the screen height using a 1/2" hex drill bit to any height between 48 and 65 inches (122 - 165 cm)
    • Flexible cable covers for lay in access down either side of the column to connect to external AV equipment
    • Internal storage rack mountable and non-rack mountable AV components
    • Includes hardware to vertically mount 2 RUs of AV gear (inside dimension H x W x D: 38.0 x 18.4 x 4.3" (96.5 x 46.7 x 10.9 cm)
    • Removable front and back covers allow for easy cable routing to AV components stored inside the cart
    • Includes cable wrap hardware for cable management inside and outside of cart
    • Landscape screen orientation (portrait only if screen is at least 34" tall and has a mounting pattern 400 x 400mm or smaller
    • Ships with pre-assembled heavy-duty casters (front two casters are lockable)
PDR_large
Quick View

This swing arm mount allows for perfect flat panel display placement and ensures ideal viewing from any angle.

All PDR2XXX custom versions discontinued June 1, 2014.

PDRUB, PDRUS, PDR2000B and PDR2000S (PDR2000 mounts require PSB custom or universal interfaces purchased separately) still available.

  • Centris Technology tilt mechanism adjusts to provide fingertip tilt with most flat panels
  • Post-installation height adjustment up to 1" (25 mm) for ultimate installation flexibility
  • Q-Latch Mounting System secures flat panel to mount with a latching flag
  • Extends 37" (93.98 cm) for viewing from any angle, and remains low-profile in home position
  • CableTrac System provides built-in cable management channels inside the arms for a clean installation
  • Screen can be installed in portrait or landscape orientation (PAC400 accessory can be used to rotate without removing the screen).
RSMA_large
Quick View

Ideal for smaller projector models, these miniature versions of the RPA Elite ceiling projector mounts include all the same great features in almost half the size.

Custom mounts can be found by using MountFinder for the specific product or by search for the custom SKU. 

  • Compact design is smaller than the RPA Elite by 1/3 and includes all the same features
  • MicroZone Adjustments make projector registration fast and precise (including flush mount installations)
  • Centris Technology enables effortless fingertip positioning and self-adjusts to support different projector weights
  • Integrated cable management through top of mount without additional accessories
  • Q-Lock Quick Release Lever provides quick connect/disconnect of the projector for service and enhanced security with an integrated key and lock system (4 key options)
K1D120SB_large
Quick View

The enhanced Kontour™ K1D Dynamic Height-Adjustable Desk Clamp Mounts are the perfect monitor mount solutions for the office, healthcare facilities or home. Best-in-class weight capacity range makes specification simple!

Key enhancements have been made to Chief's patented Centris™ Extreme Tilt technology for the ultimate in effortless fingertip monitor positioning. Kontour™ monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work space.

  • Best-in-class weight capacity range of 5 to 25 lbs. makes specification simple
    • No need to pay more for that "heavy duty" arm to support your Apple monitor or All-in-One!
  • Sleek, solidly-constructed forged aluminum arms in subtle silver and black finishes
  • Enhanced patented Centris Extreme Tilt provides +75°, -10° of effortless tilt, for optimal viewing comfort whether sitting or standing
  • 13" (330 mm) of dynamic height adjustment using smooth motion gas-spring technology
  • Enhanced 3-step installation and quick-release monitor interface for easy mounting and maintenance, with included tool storage in the updated base
  • Easily clamps to edge of desk, through standard grommet hole, or through bolt hole with included kit
  • Tool-free cable management covers for a clean, professional look
  • With high levels of recycled content & a highly-recyclable design, Chief Kontour monitor arms may contribute to valuable LEED-CI, -NC, and -EB credits!
  • Most Kontour™ K1 products are TAA-compliant - see respective product pages for details

Contact Customer Service at 952-894-6280 or toll-free in the U.S. at 800-582-6480.
SYSAUW
Quick View
Universal Suspended Ceiling Mount Kits
Universal Suspended Ceiling Mount Kits Series
CHIEF_gray

Compare

Designed for speed and flexibility from an ordering and installation standpoint. Chief's SYSAU Suspended Ceiling Projector System cuts installation time by one-third and includes everything needed to complete the majority of installations.

XVAUB_large
Quick View

This mobile FUSION AV Cart incorporates rounded edges and sleek features to give the cart a softer professional feel that fits well in corporate and classroom environments. The height can be adjusted by one person via a 1/2" hex bit on a power drill without removing the screen.




  • Sleek, two-toned look suitable for multiple environments including education, corporate and digital signage

  • Turn knob allows single user to easily adjust the screen height using a 1/2" hex drill bit to any height between 41.9 to 50.4" (106.4 to 128.0 cm)

  • Internal storage rack mountable (pre-installed rack rail) and non-rack mountable AV components

  • Includes hardware to vertically mount 11 RUs of AV gear (inside dimension H x W x D: 24 x 19 x 15" (60.9 x 48.2 x 38.1 cm)

  • Removable side, rear and front panels for easy component access and cable routing

  • Reversible front door with smoked acrylic glass for access to IR controlled components.

  • Includes hooks in back for cable bundling during transport

  • Includes 14" wide above component shelf (FCA501)

  • For dual display applications add the Dual-Display accessory - FCA623

  • Ships fully assembled, on a pallet, with standard casters (front two casters are lockable)

RSA_large
Quick View

The RSA ceiling projector mount offers a compact design for smaller projectors with all the same great features as the standard RPA Series.

Custom mounts can be found by using MountFinder for the specific product or by search for the custom SKU. 

  • Compact design is smaller than the RPA by 1/3 and includes the same great features
  • Independent roll, pitch and yaw for quick and precise projector registration
  • Quick connect/disconnect with convenient lamp and filter access on most projectors
  • Disconnecting maintains registration and doesn't affect preset adjustments
  • All-Points Security steel-into-steel locking hardware at all connection points protects against theft
  • Multiple installation options including: flush mount to ceiling, use 0.25" threaded rods, or use a 1.5" NPT column
K3F310B_large
Quick View

Flexibility meets form and function with the Kontour K3 series of elegantly designed static multi-monitor array mounts from Chief.

K3 products provide an aesthetic, stable solution for use in a variety of multi-monitor applications: call centers, control rooms, financial services, gaming, health care, IT, security desks, and others.

Most K3 series configurations are available as free standing or grommet/bolt through mounts. The KRA500 Desk Clamp accessory is also available for most K3 series array mounts.

  • Flexible multi-monitor array mounts available in configurations from dual up to six displays
  • Products ship largely pre-assembled for fast installation
  • Tool-free integrated cable management
  • Independent height, pan, & tilt adjustment of each display for flexible monitor positioning
  • Free-standing or grommet mounting styles, with optional desk clamp accessory
  • Streamlined modern aesthetic
  • Majority of Kontour™ K3 products are TAA-compliant